Group Home I Petroleum Engineering Home I Approved Connection List I Plant List I Contact Us I News

Mountwest Dubai This text is for indication only and dose not reflect the actual information that is intended for this section of this website. This text is for indication only and dose not reflect the actual information that is. This text is for indication only and dose not reflect the actual information that is intended for this section of this website. This text is for indication only and dose not reflect the actual information that is intended for this section of this website.

Mountwest inc - Huston This text is for indication only and dose not reflect the actual information that is intended for this section of this website. This text is for indication only and dose not reflect the actual information that is intended for this section of this website. This text is for indication. This text is for indication only and dose not reflect the actual information that is intended for this section of this website.

Group

Petroleum Engineering

Thomson McFarlane

Aberdeen

Montrose

Gulf

Houston

Mountwest Plant List CNC TURNING Yamazaki Power Master Chucker with Mazatrol TI Control 9 ¾” hollow spindle and 34.00” swing over bed. Machine is equipped with a front 650mm air operated chuck and a manual 3 jaw rear chuck. Machine is serviced by a semi-automatic transfer system having a capacity of up to 40’ in length. Ramses 825-360 CN Universal Lathe with Siements 3T Control 14 ¼” hollow spindle, 39.0” swing over bed and 26.0” swing over saddle. Machine is equipped with a manual 4 jaw front chuck and a manual 3 jaw rear chuck capable of handling 4 metres between centres. Machine is serviced by a semi-automatic transfer system having a capacity of up to 40’ in length. Demoor 825-360 CN Universal Lathe with Heidenhain Manual Plus 4110 Control 14 ¼” hollow spindle, 39.0” swing over bed and 26.0” swing over saddle. Machine is equipped with manual 4 jaw front and rear chucks capable of handling 4 metres between centres. Machine is serviced by a semi-automatic transfer system having a capacity of up to 40’ in length. Heinemann DN400 CNC Lathe with Siemanns 802D Control 11¾” hollow spindle, 34¼” swing over bed with nominal length of 3 metre’s. Max turning diameter over bed is 34¼”. Max turning diameter over cross slide is 25 3/8”. Dugard Eagle 300 CNC Lathe with Fanuc 0TD Control 3" spindle bore. 10" hydraulic power chuck. Tailstock with programmable quill. Manual tool setting probe. 24" maximum swing. 18" maximum turned diamiter. 30" maximum turned length. Spindle speed 30-3,500rpm. Hitachi Seiki Hitec-Turn 40S with Fanuc 10TE-F Control 4.720” spindle bore, 15.0” Hydraulic Power Chuck. Tailstock with Programmable Quill. 27.60” maximum swing, 43.30” maximum turned length. Spindle Speed 20-1800rpm. CONVENTIONAL TURNING Est Ticino ET420 6¼” hollow spindle, 33.0” swing over bed and 20.0” swing over saddle. 2 metres between centres. Equipped with 4 jaw independent front chuck and digital readout. Colchester Triumph 2000 Gap Bed Centre Lathe 50.0” between centres, 16.0” swing over bed, 24.0” swing over gap c/w quick change tool post, hydraulic copying attachment and threading attachment. MILLING Vernier Universal Mill Table size 59.0” x 12 ½”. Digital Readout. Bridgeport Mill Digital Readout and table capacity of 48.0” x 9.0”. DRILLING Kitchen Walker Radial Arm Drill 3.0” diameter drilling capacity with a 6ft radial swing. DEEP HOLE BORING Hertel Boring up to 5 ½” inside diameter. PHOSPHATING Temperature controlled Manganese phosphate immersion tank with 350 litre capacity. Temperature controlled Zinc barrel phosphate spray tank. BREAKOUT/TORQUE SWAGING MACHINES ACM Twin Rotating Chuck with 17.0” Capacity. Fully equipped with computerised Torque Turn Unit giving graph read out of coupling pipe make up. Capable of torquing up to 60,000ft/lbs. Maxtube Pipe Swaging and Punching machine with a capacity of 2.375” to 13.375”. INSPECTION EQUIPMENT Comprehensive range of measuring equipment and thread gauges. Gaugemaker Mic Trac MT-3000 Measuring Centre & various MRP gauges. Mitutoyo Optical Projector (50x) + (20X)